Authorize

Request to obtain an authorization for a proposed funds transfer. An authorization is a response from a financial institution indicating that payment information is valid and funds are available in the payers account.

PUT https://na.gateway.mastercard.com/api/rest/version/100 / merchant / {merchantId} / order / {orderid} / transaction / {transactionid}

Authentication Copied to clipboard

This operation requires authentication via one of the following methods:


  • Certificate authentication.
  • Basic HTTP authentication as described at w3.org. Provide 'merchant.<your gateway merchant ID>' in the userid portion and your API password in the password portion.

Request Copied to clipboard

URL Parameters Copied to clipboard

{merchantId} Copied to clipboard Alphanumeric + additional characters REQUIRED

The unique identifier issued to you by your payment provider.


This identifier can be up to 12 characters in length.


Data may consist of the characters 0-9, a-z, A-Z, '-', '_'

Min length: 1 Max length: 40
{orderid} Copied to clipboard String REQUIRED

A unique identifier for this order to distinguish it from any other order you create.


Use this identifier when referring to this order in subsequent transactions and in retrieval operations. This value must be unique for every order you create using your merchant profile.


Data can consist of any characters

Min length: 1 Max length: 40
{transactionid} Copied to clipboard String REQUIRED

Unique identifier for this transaction to distinguish it from any other transaction on the order.


An order can have transactions representing:

  • Movement of money. For example, payments and refunds.
  • Validations. For example, account verification or 3-D Secure authentication of the payer.
  • Undoing other transactions. For example, voiding a payment transaction.
  • Chargebacks.
  • Fees from your payment service provider.
Each transaction on the order must have a unique id that identifies that transaction. Some transactions also hold the transaction identifier of other transactions on the order. For example a void payment transaction references the original payment transaction that is being voided.

If you attempt an operation and it fails (eg you try to PAY on a card with no funds), then you need a new id for each retry.


Data can consist of any characters

Min length: 1 Max length: 40

Fields Copied to clipboard

accountFunding Copied to clipboard OPTIONAL

Additional details for account funding transactions (order.purchaseType=ACCOUNT_FUNDING).

Account funding transactions are transactions that pull money from the sender's card account for the purpose of funding another account, the recipient's account. Depending on the type of account funding transaction you may be required to provide some or all the details in this parameter group.

accountFunding.purpose Copied to clipboard Enumeration OPTIONAL

Defines the purpose of the account funding payment.If not provided the value is defaulted to OTHER.

Value must be a member of the following list. The values are case sensitive.

CRYPTOCURRENCY_PURCHASE

The funds from this account funding transaction will exclusively be used to purchase cryptocurrency.

MERCHANT_SETTLEMENT

The funds from this account funding transaction will be used to settle the proceeds of processing card transactions.

OTHER

The funds from this account funding transaction will be used for any other purpose, e.g. transferring funds from a person to a person or transferring funds into a staged wallet. This is the default value.

PAYROLL

The funds from this account funding transaction will be used to pay salaries.

accountFunding.recipient Copied to clipboard OPTIONAL

Details about the recipient who will subsequently receive the funds that you are debiting from the sender in this transaction.

accountFunding.recipient.address Copied to clipboard OPTIONAL

Details of the recipient's address.

accountFunding.recipient.address.city Copied to clipboard String OPTIONAL

The city portion of the address.

Data can consist of any characters

Min length: 1 Max length: 100
accountFunding.recipient.address.country Copied to clipboard Upper case alphabetic text OPTIONAL

The 3 letter ISO standard alpha country code of the address.

Data must consist of the characters A-Z

Min length: 3 Max length: 3
accountFunding.recipient.address.postCodeZip Copied to clipboard String OPTIONAL

The post code or zip code of the address.

Data can consist of any characters

Min length: 1 Max length: 10
accountFunding.recipient.address.stateProvinceCode Copied to clipboard String OPTIONAL

The second part of the ISO 3166-2 country subdivision code for the state or province of the address.

For an address in the United States provide the 2-letter ISO 3166-2 state code. For US military bases provide one of AE, AA, AP. For an address in Canada provide the 2-letter ISO 3166-2 province code.

Data can consist of any characters

Min length: 1 Max length: 3
accountFunding.recipient.address.street Copied to clipboard String OPTIONAL

The first line of the address.

Data can consist of any characters

Min length: 1 Max length: 100
accountFunding.recipient.address.street2 Copied to clipboard String OPTIONAL

The second line of the address.

Data can consist of any characters

Min length: 1 Max length: 100
accountFunding.recipient.firstName Copied to clipboard String OPTIONAL

First name of the recipient.

Data can consist of any characters

Min length: 1 Max length: 50
accountFunding.recipient.identification Copied to clipboard OPTIONAL

Identification of the recipient.

accountFunding.recipient.identification.country Copied to clipboard Upper case alphabetic text OPTIONAL

The ISO 3166 three-letter country code of the issuer of the identification.

Data must consist of the characters A-Z

Min length: 3 Max length: 3
accountFunding.recipient.identification.type Copied to clipboard Enumeration OPTIONAL

The type of identification provided for the recipient.

Value must be a member of the following list. The values are case sensitive.

ALIEN_REGISTRATION_NUMBER

The recipient's identification type is an alien registration number issued by U.S. Citizenship and Immigration Services (USCIS) to immigrants who apply to live in the United States.

BUSINESS_TAX_ID

The recipient's identification type is a business tax id which is assigned to the business entity by the tax department.

COMPANY_REGISTRATION_NUMBER

The recipient's identification type is a company registration number which is issued to the company at the time of its incorporation.

CUSTOMER_IDENTIFICATION

The recipient's identification type is an unspecified form of customer identification through which the recipient can be identified and verified.

DATE_OF_BIRTH

The recipient's identification type is date of birth.

DRIVERS_LICENSE

The recipient's identification type is a driving license.

EMAIL

The recipient's identification type is an email address.

GOVERNMENT_ISSUED

The recipient's identification type is government issued.

INDIVIDUAL_TAX_ID

The recipient's identification type is an individual tax id which is assigned to the individual by the tax department.

LAW_ENFORCEMENT_IDENTIFICATION

The recipient's identification type is a law enforcement identification.

MILITARY_IDENTIFICATION

The recipient's identification type is a military identification which is issued by the department of defense and military.

NATIONAL_IDENTIFICATION_CARD

The recipient's identification type is a national identification card issued by the recipient's country.

OTHER

The recipient's identification type cannot be classified using any of the other categories. This is the default value.

PASSPORT

The recipient's identification type is a passport.

PHONE_NUMBER

The recipient's identification type is a phone number.

PROXY_IDENTIFICATION

The recipient's identification type is a proxy identification.

SOCIAL_SECURITY_NUMBER

The recipient's identification type is a social security number issued by Social Security Administration (SSA) to U.S. citizens, permanent residents and eligible non-immigrant workers in the United States.

TRAVEL_IDENTIFICATION

The recipient's identification type is a travel document other than a passport.

accountFunding.recipient.identification.value Copied to clipboard String OPTIONAL

The identification value/number for the type of identification provided in accountFunding.recipient.identification.type.

Data can consist of any characters

Min length: 1 Max length: 50
accountFunding.recipient.lastName Copied to clipboard String OPTIONAL

Last name of the recipient.

Data can consist of any characters

Min length: 1 Max length: 50
accountFunding.recipient.middleName Copied to clipboard String OPTIONAL

Middle name of the recipient.

Data can consist of any characters

Min length: 1 Max length: 50
accountFunding.senderIsRecipient Copied to clipboard Boolean OPTIONAL

Defines if the sender and recipient of the account funding payment are the same or not.

If not provided the value is defaulted to FALSE.

JSON boolean values 'true' or 'false'.

accountFunding.senderType Copied to clipboard Enumeration OPTIONAL

Defines if the sender is a person, a commercial organization, a non-profit organization or a government

Value must be a member of the following list. The values are case sensitive.

COMMERCIAL_ORGANIZATION

The sender is a commercial organization. Examples include account to account transfers initiated by a commercial organization for the purpose of transferring funds to one of their accounts, business to business payments, and disbursements for insurance claims, payroll, investment dividends, merchant rebates.

GOVERNMENT

The sender is a government or government agency. Examples include government agencies paying salaries, pensions, social benefits or tax credits.

NON_PROFIT_ORGANIZATION

The sender is a non-profit organization. Examples include non-profit organizations delivering emergency aid payments.

PERSON

The sender is a person. Examples include account to account transfers initiated by a person to their own account or a different person's account and adding funds to a staged wallet.

agreement Copied to clipboard OPTIONAL

A commercial agreement you have with the payer that allows you to store and use their payment details for later payments.

For example, an agreement to a series of recurring payments (a mobile phone subscription), an agreement to take payment for a purchase by a series of installments (hire purchase), an agreement to make additional payments when required (account top up), or to fulfil a standard industry practice (no show penalty charge).

Do not provide this parameter group if you are storing the payment details for subsequent payer-initiated payments only.

See Credential on File, Cardholder, and Merchant Initiated Transactions for details.

agreement.amountVariability Copied to clipboard Enumeration OPTIONAL

Indicates if all the payments within the agreement use the same amount or if the amount differs between the payments.

The field must be provided for recurring payment agreements.

Value must be a member of the following list. The values are case sensitive.

FIXED

All payments in the recurring payment agreement have the same amount. Examples include magazine subscriptions or gym memberships.

VARIABLE

The amount for the payments within the recurring payment agreement differs between payments. Examples include usage-based charges like utility or phone bills.

agreement.customData Copied to clipboard String OPTIONAL

Additional information requested for the agreement which cannot be passed using other available data fields.

This field must not contain sensitive data.

Data can consist of any characters, but sensitive data will be rejected

Min length: 1 Max length: 2048
agreement.expiryDate Copied to clipboard Date OPTIONAL

Date at which your agreement with the payer to process payments expires.

Data must comply with ISO 8601 extended date format, yyyy-mm-dd

agreement.id Copied to clipboard String OPTIONAL

Your identifier for the agreement you have with the payer to process payments.

When you collect cards from your payers and store them for later use, you must provide an agreement ID when you use the stored values for:

  • Recurring payments: you have an agreement with the payer that authorizes you to automatically debit their account at agreed intervals for fixed or variable amounts. For example, gym membership, phone bills, or magazine subscriptions.
  • Installment payments: you have an agreement with the payer that authorizes you to process multiple payments over an agreed period of time for a single purchase. For example, the payer purchases an item for $1000 and pays for it in four monthly installments.
  • Unscheduled: you have an agreement with the payer that authorizes you to process future payments when required. For example, the payer authorizes you to process an account top-up transaction for a transit card when the account balance drops below a certain threshold.
  • Industry Practice: you have an agreement with the payer that authorizes you to initiate additional transactions to fulfil a standard business practice related to an original payment initiated by the payer. For example, a delayed charge for use of the hotel mini bar after the payer has checked out or a no show penalty charge when the payer fails to show for a booking.
When you first establish an agreement with the payer you should also specify the type of agreement in agreement.type.

Data can consist of any characters

Min length: 1 Max length: 100
agreement.maximumAmountPerPayment Copied to clipboard Decimal OPTIONAL

The maximum amount for a single payment in the series as agreed with the payer under your agreement with them.

The amount must be provided in the currency of the order.

Data is a string that consists of the characters 0-9 and '.' and represents a valid decimal number.

Min length: 1 Max length: 14
agreement.minimumAmountPerPayment Copied to clipboard Decimal OPTIONAL

The minimum amount for a single payment in the series as agreed with the payer under your agreement with them.

The amount must be provided in the currency of the order.

Data is a string that consists of the characters 0-9 and '.' and represents a valid decimal number.

Min length: 1 Max length: 14
agreement.minimumDaysBetweenPayments Copied to clipboard Integer OPTIONAL

The minimum number of days between payments agreed with the payer under your agreement with them.

JSON number data type, restricted to being positive or zero. In addition, the represented number may have no fractional part.

Min value: 1 Max value: 9999
agreement.numberOfPayments Copied to clipboard Integer OPTIONAL

The number of merchant-initiated payments within the recurring payment agreement.

JSON number data type, restricted to being positive or zero. In addition, the represented number may have no fractional part.

Min value: 1 Max value: 999
agreement.paymentFrequency Copied to clipboard Enumeration OPTIONAL

The frequency of the payments within the series as agreed with the payer under your agreement with them.

Value must be a member of the following list. The values are case sensitive.

AD_HOC

The agreement if for payments on an ah-hoc basis.

DAILY

The agreement if for a daily payment.

FORTNIGHTLY

The agreement if for a fortnightly payment.

MONTHLY

The agreement if for a monthly payment.

OTHER

The agreement is for payments according to a schedule other than the ones listed in the other enumeration values for this field.

QUARTERLY

The agreement if for a quarterly payment.

TWICE_YEARLY

The agreement if for a payment twice a year.

WEEKLY

The agreement if for a weekly payment.

YEARLY

The agreement if for a yearly payment.

agreement.retailer Copied to clipboard OPTIONAL

For an installment agreement where the payer purchased goods and/or services from a retailer but entered an installment agreement to pay for this purchase with you, you must provide details about the retailer.

agreement.retailer.abbreviatedTradingName Copied to clipboard String OPTIONAL

Provide an abbreviation of the retailer's trading name that can be used by the issuer to indicate the retailer on the payer's statement.

Data can consist of any characters

Min length: 1 Max length: 10
agreement.retailer.merchantCategoryCode Copied to clipboard String OPTIONAL

A 4-digit code used to classify the retailer's business by the type of goods or services it offers.

Data can consist of any characters

Min length: 1 Max length: 4
agreement.retailer.tradingName Copied to clipboard String OPTIONAL

The retailer's trading name.

Data can consist of any characters

Min length: 1 Max length: 100
agreement.startDate Copied to clipboard Date OPTIONAL

This is the effective start date for the payment agreement.

Cannot be in the past.

Data must comply with ISO 8601 extended date format, yyyy-mm-dd

agreement.type Copied to clipboard Enumeration OPTIONAL

The type of commercial agreement that the payer has with you.

Specify the agreement type when you have provided a value for agreement.id and this payment is the first in a series of payments. The default value is OTHER.

The gateway will use the value you specify for subsequent payments in the series.

Value must be a member of the following list. The values are case sensitive.

INSTALLMENT

An agreement where the payer authorizes the payment for a single purchase to be split into a number of payments processed at agreed intervals. For example, pay for a purchase in six monthly installments.

OTHER

An agreement where you want to link related payments for any purpose other than processing recurring, installment, or unscheduled payments. For example, split tender payments.

RECURRING

An agreement where the payer authorizes you to process repeat payments for bills or invoices at agreed intervals (for example, weekly, monthly). The amount might be fixed or variable.

UNSCHEDULED

An agreement where the payer authorizes you to automatically deduct funds for a payment for an agreed purchase when required (unscheduled). For example, auto top-ups when the account value falls below a threshold.

airline Copied to clipboard OPTIONAL

Airline industry specific data.

airline.bookingReference Copied to clipboard Alphanumeric OPTIONAL

The record locator used to access a specific Passenger Name Record (PNR).

PNR is a record in the database of a booking system that contains the itinerary for a passenger, or a group of passengers traveling together.

Data may consist of the characters 0-9, a-z, A-Z

Min length: 6 Max length: 15
airline.documentType Copied to clipboard Enumeration OPTIONAL

The type of charge associated with the transaction.

Document Type Code

Value must be a member of the following list. The values are case sensitive.

ADDITIONAL_COLLECTION

Additional Collection

AGENCY_EXCHANGE_ORDER

Agency Exchange Order

AGENCY_GROUP_TICKET

Agency Group Ticket

AGENCY_MISCELLANEOUS_CHARGE_ORDER

Agency Misc. Charge Order (MCO)

AGENCY_PASSENGER_TICKET

Agency Passenger Ticket

AGENCY_TOUR_ORDER_OR_VOUCHER

Agency Tour Order/Voucher

AIR_FREIGHT

SPD/Air Freight

ANIMAL_TRANSPORTATION_CHARGE

Animal Transportation Charge

CATALOGUE_MERCHANDISE_ORDERED

Catalogue Merchandise Ordered

CLUB_MEMBERSHIP_FEE

Club Membership Fee

COUPON_BOOK

Coupon Book

CREDIT_CLASS_SERVICE_ADJUSTMENT

Credit Class of Service Adjustment

CREDIT_DENIED_BOARDING

Credit Denied Boarding

CREDIT_EXCHANGE_REFUND

Credit Exchange Refund

CREDIT_LOST_TICKET_REFUND

Credit Lost Ticket Refund

CREDIT_MISCELLANEOUS_REFUND

Credit Misc. Refund

CREDIT_MULTIPLE_UNUSED_TICKETS

Credit Multiple Unused Tickets

CREDIT_OVERCHARGE_ADJUSTMENT

Credit Overcharge Adjustment

CREDIT_UNUSED_TRANSPORTATION

Credit Unused Transportation

DEBT_ADJUSTMENT_DUPLICATE_REFUND_OR_USE

Debt Adjustment Duplicate Refund/Use

DUTY_FREE_SALE

Duty Free Sale

EXCESS_BAGGAGE

Excess Baggage

EXCHANGE_ADJUSTMENT

Exchange Adjustment

EXCHANGE_ORDER

Exchange Order

FIREARMS_CASE

Firearms Case

FREQUENT_FLYER_FEE_OR_PURCHASE

Frequent Flyer Fee/Purchase

FREQUENT_FLYER_FULFILLMENT

Frequent Flyer Fulfillment

FREQUENT_FLYER_OVERNIGHT_DELIVERY_CHARGE

Frequent Flyer Overnight Delivery Charge

GROUP_TICKET

Group Ticket

IN_FLIGHT_ADJUSTMENT

In-flight Adjustment

IN_FLIGHT_CHARGES

In-flight Charges

IN_FLIGHT_DUTY_FREE_PURCHASE

In-flight Duty Free Purchase

IN_FLIGHT_MERCHANDISE_ORDERED

In-flight Merchandise Ordered

IN_FLIGHT_PHONE_CHARGES

In-flight Phone Charges

KENNEL_CHARGE

Kennel Charge

LOST_TICKET_APPLICATION

Lost Ticket Application

MISCELLANEOUS_CHARGE_ORDER_OR_PREPAID_TICKET_ADVICE

Misc. Charge Order (MCO) / Prepaid Ticket Auth.

MISCELLANEOUS_TAXES_FEES

Miscellaneous Tax(es) Fee(s)

PASSENGER_TICKET

Passenger Ticket

SELF_SERVICE_TICKETS

Self-Service Ticket(s)

SENIOR_CITIZEN_DISCOUNT_BOOKLETS

Senior Citizen Discount Booklets

SMALL_PACKAGE_DELIVERY

Small Package Delivery

SPECIAL_SERVICE_TICKET

Special Service Ticket

SUPPORTED_REFUND

Supported Refund

TICKET_BY_MAIL

Ticket by Mail

TOUR_DEPOSIT

Tour Deposit

TOUR_ORDER_VOUCHER

Tour Order Voucher

UNDERCHARGE_ADJUSTMENT

Undercharge Adjustment

UNSUPPORTED_REFUND

Unsupported Refund

UPGRADE_CHARGE

Upgrade Charge

VENDOR_REFUND_CREDIT

Vendor Refund Credit

VENDOR_SALE

Vendor Sale

airline.itinerary Copied to clipboard OPTIONAL

Itinerary details

airline.itinerary.leg[n] Copied to clipboard OPTIONAL

Travel leg details.

airline.itinerary.leg[n].carrierCode Copied to clipboard Regex OPTIONAL

The 2-character IATA airline code or 3 digit accounting code or both of the airline carrier for the trip leg.

Data must match regex

regex \w{2}|\d{3}|\w{2}/\d{3} message Carrier code must be 2 characters, 3 digits or a combination of both in the format: ZZ/999
airline.itinerary.leg[n].conjunctionTicketNumber Copied to clipboard Alphanumeric OPTIONAL

The ticket containing the coupon for this leg for an itinerary with more than four trip legs.

Data may consist of the characters 0-9, a-z, A-Z

Min length: 11 Max length: 16
airline.itinerary.leg[n].couponNumber Copied to clipboard Alphanumeric OPTIONAL

The coupon number on the ticket for the trip leg.

Each trip leg requires a separate coupon. The coupon within the series is identified by the coupon number.

Data may consist of the characters 0-9, a-z, A-Z

Min length: 1 Max length: 1
airline.itinerary.leg[n].departureAirport Copied to clipboard Upper case alphabetic text OPTIONAL

The 3 character IATA airport code of the departure airport for the trip leg.

Data must consist of the characters A-Z

Min length: 3 Max length: 3
airline.itinerary.leg[n].departureDate Copied to clipboard Date OPTIONAL

Date of departure for the trip leg.

Data must comply with ISO 8601 extended date format, yyyy-mm-dd

airline.itinerary.leg[n].departureTax Copied to clipboard Decimal OPTIONAL

Tax payable on departure for the trip leg.

Data is a string that consists of the characters 0-9 and '.' and represents a valid decimal number.

Min length: 1 Max length: 14
airline.itinerary.leg[n].departureTime Copied to clipboard Time OPTIONAL

Departure time in local time for the departure airport for this trip leg.

Data must comply with ISO 8601 extended time formats, hh:mm[:ss]Z or hh:mm[:ss](+/-)hh[:mm]

airline.itinerary.leg[n].destinationAirport Copied to clipboard Upper case alphabetic text OPTIONAL

The 3 character IATA airport code for the destination airport for the trip leg.

Data must consist of the characters A-Z

Min length: 3 Max length: 3
airline.itinerary.leg[n].destinationArrivalDate Copied to clipboard Date OPTIONAL

Arrival date in local time for the destination airport for this trip leg.

Data must comply with ISO 8601 extended date format, yyyy-mm-dd

airline.itinerary.leg[n].destinationArrivalTime Copied to clipboard Time OPTIONAL

Arrival time in local time for the destination airport for this trip leg.

Data must comply with ISO 8601 extended time formats, hh:mm[:ss]Z or hh:mm[:ss](+/-)hh[:mm]

airline.itinerary.leg[n].endorsementsRestrictions Copied to clipboard Alphanumeric OPTIONAL

Restrictions (e.g. non-refundable) or endorsements applicable to the trip leg.

Data may consist of the characters 0-9, a-z, A-Z

Min length: 1 Max length: 20
airline.itinerary.leg[n].exchangeTicketNumber Copied to clipboard Alphanumeric OPTIONAL

New ticket number issued when a ticket is exchanged for the trip leg.

Data may consist of the characters 0-9, a-z, A-Z

Min length: 11 Max length: 16
airline.itinerary.leg[n].fare Copied to clipboard Decimal OPTIONAL

Total fare payable for the trip leg.

Data is a string that consists of the characters 0-9 and '.' and represents a valid decimal number.

Min length: 1 Max length: 14
airline.itinerary.leg[n].fareBasis Copied to clipboard Alphanumeric OPTIONAL

Code defining the rules forming the basis of the fare (type of fare, class entitlement, etc.)

Data may consist of the characters 0-9, a-z, A-Z

Min length: 1 Max length: 24
airline.itinerary.leg[n].fees Copied to clipboard Decimal OPTIONAL

Total fees payable for the trip leg.

Data is a string that consists of the characters 0-9 and '.' and represents a valid decimal number.

Min length: 1 Max length: 14
airline.itinerary.leg[n].flightNumber Copied to clipboard Alphanumeric OPTIONAL

The flight number for the trip leg.

Data may consist of the characters 0-9, a-z, A-Z

Min length: 4 Max length: 6
airline.itinerary.leg[n].stopoverPermitted Copied to clipboard Boolean OPTIONAL

Indicates if a stopover is permitted for the trip leg.

JSON boolean values 'true' or 'false'.

airline.itinerary.leg[n].taxes Copied to clipboard Decimal OPTIONAL

Total taxes payable for the trip leg.

Data is a string that consists of the characters 0-9 and '.' and represents a valid decimal number.

Min length: 1 Max length: 14
airline.itinerary.leg[n].travelClass Copied to clipboard Alphanumeric OPTIONAL

The industry code indicating the class of service (e.g. Business, Coach) for the leg.

Data may consist of the characters 0-9, a-z, A-Z

Min length: 1 Max length: 3
airline.itinerary.numberInParty Copied to clipboard Digits OPTIONAL

Number of passengers associated with this booking.

Data is a string that consists of the characters 0-9.

Min length: 1 Max length: 3
airline.itinerary.originCountry Copied to clipboard Upper case alphabetic text OPTIONAL

The 3 character ISO 3166-1 alpha-3 country code of the country of origin for the itinerary.

Data must consist of the characters A-Z

Min length: 3 Max length: 3
airline.passenger[n] Copied to clipboard OPTIONAL

Passenger details

airline.passenger[n].firstName Copied to clipboard String OPTIONAL

First name of the passenger to whom the ticket is being issued.

Data can consist of any characters

Min length: 1 Max length: 50
airline.passenger[n].frequentFlyerNumber Copied to clipboard String OPTIONAL

Frequent Flyer or Loyalty Program number for this passenger.

Data can consist of any characters

Min length: 1 Max length: 20
airline.passenger[n].lastName Copied to clipboard String OPTIONAL

Last name of the passenger to whom the ticket is being issued.

Data can consist of any characters

Min length: 1 Max length: 20
airline.passenger[n].middleName Copied to clipboard String OPTIONAL

Middle name of the passenger to whom the ticket is being issued.

Data can consist of any characters

Min length: 1 Max length: 50
airline.passenger[n].specificInformation Copied to clipboard Alphanumeric OPTIONAL

Passenger specific information recorded on the ticket.

Data may consist of the characters 0-9, a-z, A-Z

Min length: 1 Max length: 59
airline.passenger[n].title Copied to clipboard String OPTIONAL

Title of the passenger to whom the ticket is being issued.

Data can consist of any characters

Min length: 1 Max length: 20
airline.planNumber Copied to clipboard Alphanumeric OPTIONAL

Plan number supplied by the airline for this booking.

Data may consist of the characters 0-9, a-z, A-Z

Min length: 2 Max length: 2
airline.ticket Copied to clipboard OPTIONAL

Ticket details

airline.ticket.conjunctionTicketIndicator Copied to clipboard Boolean OPTIONAL

Indicates if a conjunction ticket with additional coupons was issued.

Conjunction ticket refers to two or more tickets concurrently issued to a passenger and which together constitute a single contract of carriage.

JSON boolean values 'true' or 'false'.

airline.ticket.eTicket Copied to clipboard Boolean OPTIONAL

Indicates if an electronic ticket was issued.

JSON boolean values 'true' or 'false'.

airline.ticket.exchangedTicketNumber Copied to clipboard Alphanumeric OPTIONAL

The original ticket number when this is a transaction for an exchanged ticket.

Data may consist of the characters 0-9, a-z, A-Z

Min length: 11 Max length: 16
airline.ticket.issue Copied to clipboard OPTIONAL

Ticket issue information.

airline.ticket.issue.address Copied to clipboard String OPTIONAL

The address where the ticket was issued.

Data can consist of any characters

Min length: 1 Max length: 16
airline.ticket.issue.carrierCode Copied to clipboard Regex OPTIONAL

The 2-character IATA airline code or 3 digit accounting code or both of the airline carrier issuing the ticket.

Data must match regex

regex \w{2}|\d{3}|\w{2}/\d{3} message Carrier code must be 2 characters, 3 digits or a combination of both in the format: ZZ/999
airline.ticket.issue.carrierName Copied to clipboard Alphanumeric OPTIONAL

Name of airline carrier issuing the ticket.

Data may consist of the characters 0-9, a-z, A-Z

Min length: 1 Max length: 25
airline.ticket.issue.city Copied to clipboard String OPTIONAL

The city/town where the ticket was issued.

Data can consist of any characters

Min length: 1 Max length: 100
airline.ticket.issue.country Copied to clipboard Upper case alphabetic text OPTIONAL

The 3 character ISO 3166-1 alpha-3 country code of the country where the ticket was issued.

Data must consist of the characters A-Z

Min length: 3 Max length: 3
airline.ticket.issue.date Copied to clipboard Date OPTIONAL

The date the ticket was issued.

Data must comply with ISO 8601 extended date format, yyyy-mm-dd

airline.ticket.issue.travelAgentCode Copied to clipboard Alphanumeric OPTIONAL

Industry code of the travel agent issuing the ticket.

Data may consist of the characters 0-9, a-z, A-Z

Min length: 8 Max length: 9
airline.ticket.issue.travelAgentName Copied to clipboard Alphanumeric OPTIONAL

Name of the travel agent issuing the ticket.

Data may consist of the characters 0-9, a-z, A-Z

Min length: 1 Max length: 30
airline.ticket.restricted Copied to clipboard Boolean OPTIONAL

Indicates if the issued ticket is refundable.

JSON boolean values 'true' or 'false'.

airline.ticket.taxOrFee[n] Copied to clipboard OPTIONAL

Breakdown of the ticket taxes, airport taxes, charges and fees for an airline ticket purchase.

The total of the amounts in this group should equal the sum of the airline.ticket.totalFees and airline.ticket.totalTaxes fields.

airline.ticket.taxOrFee[n].amount Copied to clipboard Decimal OPTIONAL

The tax, charge or fee amount payable.

Data is a string that consists of the characters 0-9 and '.' and represents a valid decimal number.

Min length: 1 Max length: 14
airline.ticket.taxOrFee[n].type Copied to clipboard Alphanumeric OPTIONAL

The tax, charge or fee type code as assigned by IATA.

For example, the IATA tax/ charge/ fee type for Passenger Movement Charge (PMC) in Australia is TT1.

Data may consist of the characters 0-9, a-z, A-Z

Min length: 3 Max length: 3
airline.ticket.ticketNumber Copied to clipboard Alphanumeric OPTIONAL

The airline ticket number associated with the transaction.

Data may consist of the characters 0-9, a-z, A-Z

Min length: 11 Max length: 16
airline.ticket.totalFare Copied to clipboard Decimal OPTIONAL

Total fare for all trip legs on the ticket.

Data is a string that consists of the characters 0-9 and '.' and represents a valid decimal number.

Min length: 1 Max length: 14
airline.ticket.totalFees Copied to clipboard Decimal OPTIONAL

Total fee for all trip legs on the ticket.

Data is a string that consists of the characters 0-9 and '.' and represents a valid decimal number.

Min length: 1 Max length: 14
airline.ticket.totalTaxes Copied to clipboard Decimal OPTIONAL

Total taxes for all trip legs on the ticket.

Data is a string that consists of the characters 0-9 and '.' and represents a valid decimal number.

Min length: 1 Max length: 14
airline.transactionType Copied to clipboard Enumeration OPTIONAL

The type of transaction performed against this airline booking.

Transaction Type

Value must be a member of the following list. The values are case sensitive.

EXCHANGE_TICKET

Exchange Ticket

MISCELLANEOUS_CHARGE

Miscellaneous Charge

REFUND

Refund

REVERSAL

Reversal

TICKET_PURCHASE

Ticket Purchase

TOUR_ORDER

Tour Order

apiOperation Copied to clipboard String = AUTHORIZE FIXED

Any sequence of zero or more unicode characters.

authentication Copied to clipboard OPTIONAL

Information about how the payer's identity is verified.

For example, using 3-D Secure authentication.

This parameter group include payer authentication options available to you, parameters you need to perform payer authentication for an available method, and the results of payer authentication.

authentication.3ds Copied to clipboard OPTIONAL

Information about payer authentication using 3-D Secure authentication.

Only provide these fields if you authenticated the payer using a different 3-D Secure service provider. If you authenticated the payer using the gateway, then provide authentication.transactionId instead.

Parameters in this group apply to both 3-D Secure authentication version 1 and 3-D Secure Authentication version 2.

Depending on the 3-D Secure authentication version applicable you will also need additional parameters:

- 3-D Secure authentication version 1: see the authentication.3ds1 parameter group.
- 3-D Secure authentication version 2: see the authentication.3ds2 parameter group.

authentication.3ds.acsEci Copied to clipboard Alphanumeric OPTIONAL

Indicates the security level of the transaction.

This is the Electronic Commerce Indicator (ECI) value provided by the issuer's Access Control Server (ACS) to indicate the results of the attempt to authenticate the payer.

Data may consist of the characters 0-9, a-z, A-Z

Min length: 1 Max length: 2
authentication.3ds.authenticationToken Copied to clipboard Base64 OPTIONAL

The base64 encoded value generated by the issuer.

The authentication token Included in subsequent transaction request messages and used by the card scheme to verify that the authentication occurred and the values provided are valid. The token should be used unaltered. For 3DS version 1, this field corresponds to the Cardholder Authentication Verification Value (CAVV) for Visa, the Accountholder Authentication Value (AAV) for MasterCard and JCB, or the American Express Verification Value (AEVV) for American Express.

For 3DS version 2, this field corresponds to the Authentication Value.

Data is Base64 encoded

allowable lengths 28 or 32
authentication.3ds.transactionId Copied to clipboard String OPTIONAL

A unique identifier for the 3-D Secure authentication transaction.

For 3DS version 1, this field corresponds to the XID. The XID is an identifier generated by the gateway on behalf of the merchant.

For 3DS version 2, this field corresponds to the identifier assigned by the scheme directory server.


This identifier should be used in subsequent operation requests unaltered.

An XID submitted in this field must be in base64 format.

Data can consist of any characters

Min length: 1 Max length: 50
authentication.3ds1 Copied to clipboard OPTIONAL

Information about payer authentication using 3-D Secure authentication version 1.

Only provide these fields if you authenticated the payer using a different 3-D Secure service provider. If you authenticated the payer using the gateway, then provide authentication.transactionId instead.

authentication.3ds1.paResStatus Copied to clipboard Alpha OPTIONAL

Indicates the result of payer authentication with the issuer.

This is the value returned in the transaction status field of the Payer Authentication Response (PARes) message from the card Issuer's Access Control Server (ACS). For example, Y, N, A, or U. Refer to the relevant documentation for Mastercard SecureCode™, Verified by Visa™, JCB J/Secure™, American Express SafeKey™, or Diners Club ProtectBuy™.

Data may consist of the characters a-z, A-Z

Min length: 1 Max length: 1
authentication.3ds1.veResEnrolled Copied to clipboard Alpha OPTIONAL

Indicates whether or not payer authentication is available for the card number you provided.

This is for experts only - most users should use the response.gatewayRecommendation field.

This is the value returned in the 'enrolled' field of the Verify Enrollment Response (VERes) message from the card scheme's Directory Server. For example, Y, N, or U. Refer to the relevant documentation for Mastercard SecureCode™, Verified by Visa™, JCB J/Secure™, American Express SafeKey™, or Diners Club ProtectBuy™.

Data may consist of the characters a-z, A-Z

Min length: 1 Max length: 1
authentication.3ds2 Copied to clipboard OPTIONAL

Information about payer authentication using 3-D Secure authentication version 2.

Only provide these fields if you authenticated the payer using a different 3-D Secure service provider. If you authenticated the payer using the gateway, then provide authentication.transactionId instead.

authentication.3ds2.acsReference Copied to clipboard String OPTIONAL

Reference number assigned to the issuer's Access Control Server (ACS) by EMV Co upon approval of the ACS.

This field corresponds to EMVCo field acsReferenceNumber.

Data can consist of any characters

Min length: 0 Max length: 32
authentication.3ds2.acsTransactionId Copied to clipboard String OPTIONAL

A unique transaction identifier assigned by the Access Control Server to identify the 3DS transaction.

Data can consist of any characters

Min length: 36 Max length: 36
authentication.3ds2.authenticationScheme Copied to clipboard Enumeration OPTIONAL

The EMV 3DS authentication scheme that was used to process the authentication request.

You must provide this field for co-branded card transactions that were authenticated outside MPGS using an external 3DS provider.

For example, for externally authenticated Mada co-branded transactions, you must provide either MADA, MASTERCARD or VISA to specify the 3DS directory server.

Value must be a member of the following list. The values are case sensitive.

AMEX

for American Express SafeKey EMV 3DS authentications

CARTE_BANCAIRE

for FAST'R by CB EMV 3DS authentications

DISCOVER

for Diners Club/Discover ProtectBuy EMV 3DS authentications

ITMX

for ITMX LSS EMV 3DS authentications

JCB

for JCB J/Secure EMV 3DS authentications

MADA

for mada secure EMV 3DS authentications

MASTERCARD

for Mastercard Identity Check EMV 3DS authentications

UNIONPAY

for UnionPay EMV 3DS authentications

VISA

for Visa Secure EMV 3DS authentications

authentication.3ds2.custom Copied to clipboard JSON Text OPTIONAL

Additional information returned by the scheme or issuer in the authentication response that must be included (together with the standard authentication details) when submitting the transaction for processing by the acquirer.

Data is valid Json Format

Min length: 1 Max length: 4000
authentication.3ds2.dsReference Copied to clipboard String OPTIONAL

Reference number assigned to the Directory Server (DS) by EMV Co upon approval of the DS.

This field corresponds to EMVCo field dsReferenceNumber.

Data can consist of any characters

Min length: 0 Max length: 32
authentication.3ds2.protocolVersion Copied to clipboard Alphanumeric + additional characters OPTIONAL

The version of the EMV 3-D Secure protocol used to perform 3-D Secure authentication, in the format specified by EMVCo.

For example, 2.1.0

Data may consist of the characters 0-9, a-z, A-Z, '.'

Min length: 1 Max length: 20
authentication.3ds2.statusReasonCode Copied to clipboard String OPTIONAL

A code indicating the reason for the transaction status returned in authentication.3ds2.transactionStatus.

Refer to the EMVCo specification for 3-D Secure.

Data can consist of any characters

Min length: 2 Max length: 2
authentication.3ds2.transactionStatus Copied to clipboard Alpha OPTIONAL

Indicates the result of payer authentication with the issuer.

This is the value returned in the transaction status field from the issuer's Access Control Server (ACS). For example, Y, N, U, A, R

Refer to the EMVCo specification for 3-D Secure.

Data may consist of the characters a-z, A-Z

Min length: 1 Max length: 1
authentication.amount Copied to clipboard Decimal OPTIONAL

The amount for which the payer authentication has been performed.

Data is a string that consists of the characters 0-9 and '.' and represents a valid decimal number.

Min length: 1 Max length: 14
authentication.psd2 Copied to clipboard OPTIONAL

This parameter group is only applicable if you are subject to the Regulatory Technical Standards (RTS) requirements for Strong Customer Authentication (SCA) under the Payment Services Directive 2 (PSD2) regulations in the European Economic Area.

It provides details about SCA exemptions under PSD2.

authentication.psd2.exemption Copied to clipboard Enumeration OPTIONAL

Indicates why this payment qualifies for exemption from Strong Customer Authentication (SCA) under the Payment Services Directive 2 (PSD2).

Note:

  • For recurring payments provide the RECURRING_PAYMENT value only if the amount is the same. If the amount varies, provide MERCHANT_INITIATED_TRANSACTION instead.

Value must be a member of the following list. The values are case sensitive.

AUTHENTICATION_OUTAGE

Allows the merchant to claim an exemption because authentication was not possible due to a technical outage.

AUTO

If either a LOW_RISK or LOW_VALUE_PAYMENT or TRUSTED_MERCHANT exemption applies to the transaction, it is automatically claimed by the gateway on behalf of the merchant.

LOW_RISK

Exemption is claimed because the acquirer has a low fraud rate.

LOW_VALUE_PAYMENT

Exemption is claimed as the amount is below 30 Euro.

MERCHANT_INITIATED_TRANSACTION

The transaction is excluded as it was initiated by the merchant based on an agreement with the payer. For example, a recurring payment (for a varied or fixed amount), installment payment, or account top-up. In these cases, the payer is not present and cannot participate in an authentication interaction. Merchant initiated transactions are only applicable to subsequent transactions on the order and are out of scope of the PSD2 RTS on Strong Customer Authentication (SCA). The payer must be authenticated during the first transaction that established the agreement.

NONE

An exemption is not claimed for this transaction. The merchant requires Strong Customer Authentication (SCA) be performed.

RECURRING_PAYMENT

The transaction is exempt as it was initiated by the merchant based on an agreement with the payer for a recurring payment for a fixed amount. This value is only applicable to subsequent transactions on the order. In this case, the payer is not present and cannot participate in an authentication interaction. The payer must be authenticated during the first transaction that established the agreement.

SECURE_CORPORATE_PAYMENT

The transaction is exempt as it is a corporate or Business-to-Business (B2B) payment performed using dedicated payment processes and protocols that are not available to consumers and offer at least equivalent security levels.

TRUSTED_MERCHANT

The transaction is exempt because the payer has added you to the list of their trusted merchants (as maintained by the issuer).

authentication.time Copied to clipboard DateTime OPTIONAL

Date and time of the payer authentication being performed.

An instant in time expressed in ISO8601 date + time format - "YYYY-MM-DDThh:mm:ss.SSSZ"

authentication.transactionId Copied to clipboard String OPTIONAL

The transactionId you used for the Initiate Authentication operation.

Data can consist of any characters

Min length: 1 Max length: 40
billing Copied to clipboard OPTIONAL

Details of the payer's billing address.

billing.address Copied to clipboard OPTIONAL

The payer's billing address.

This data may be used to qualify for better interchange rates on corporate purchase card transactions.

billing.address.city Copied to clipboard String OPTIONAL

The city portion of the address.

Data can consist of any characters

Min length: 1 Max length: 100
billing.address.company Copied to clipboard String OPTIONAL

The name of the company associated with this address.

Data can consist of any characters

Min length: 1 Max length: 100
billing.address.country Copied to clipboard Upper case alphabetic text OPTIONAL

The 3 letter ISO standard alpha country code of the address.

Data must consist of the characters A-Z

Min length: 3 Max length: 3
billing.address.postcodeZip Copied to clipboard Alphanumeric + additional characters OPTIONAL

The post code or zip code of the address.

Data may consist of the characters 0-9, a-z, A-Z, ' ', '-'

Min length: 1 Max length: 10
billing.address.stateProvince Copied to clipboard String OPTIONAL

The state or province of the address.

Data can consist of any characters

Min length: 1 Max length: 20
billing.address.stateProvinceCode Copied to clipboard String OPTIONAL

The three character ISO 3166-2 country subdivision code for the state or province of the address.

Providing this field might improve your payer experience for 3-D Secure payer authentication.

Data can consist of any characters

Min length: 1 Max length: 3
billing.address.street Copied to clipboard String OPTIONAL

The first line of the address.

For example, this may be the street name and number, or the Post Office Box details.

Data can consist of any characters

Min length: 1 Max length: 100
billing.address.street2 Copied to clipboard String OPTIONAL

The second line of the address (if provided).

Data can consist of any characters

Min length: 1 Max length: 100
constraints Copied to clipboard OPTIONAL

Information about any constraints that apply to this transaction.

Specify constraints to ensure that the transaction conforms to predefined criteria. This is useful if your integration does not directly collect all the transaction values (e.g. a session-based integration or a checkout integration).

constraints.paymentPlans Copied to clipboard OPTIONAL

Information about the payment plan constraints which apply for this transaction.

Specify payment plan constraints to restrict the available payment plan options for this transaction.

constraints.paymentPlans.deferralPeriod Copied to clipboard Integer OPTIONAL

The allowable number of deferral months for the payment plan.

JSON number data type, restricted to being positive or zero. In addition, the represented number may have no fractional part.

Min value: 0 Max value: 99
constraints.paymentPlans.numberOfPayments Copied to clipboard Integer OPTIONAL

The allowable number of installments for the payment plan.

JSON number data type, restricted to being positive or zero. In addition, the represented number may have no fractional part.

Min value: 1 Max value: 99
constraints.paymentPlans.supported[n] Copied to clipboard String OPTIONAL

The identifiers for the payment plans supported for this transaction.

If you wish to offer any payment plans to the payer, provide the plan identifiers in this field else pass it as empty.

See Payment Plans for the supported payment plans and their identifiers.

Data can consist of any characters

Min length: 1 Max length: 40
correlationId Copied to clipboard String OPTIONAL

A transient identifier for the request, that can be used to match the response to the request.

The value provided is not validated, does not persist in the gateway, and is returned as provided in the response to the request.

Data can consist of any characters

Min length: 1 Max length: 100
cruise Copied to clipboard OPTIONAL

Cruise industry data.

cruise.bookingReference Copied to clipboard String OPTIONAL

The cruise booking reference.

Data can consist of any characters

Min length: 1 Max length: 12
cruise.company Copied to clipboard OPTIONAL

Information about the cruise line.

cruise.company.contact Copied to clipboard OPTIONAL

Contact details of the cruise line.

cruise.company.contact.companyPhone Copied to clipboard Telephone Number OPTIONAL

The cruise line registered office telephone number in ITU-T E123 format.

Data consists of '+', country code (1, 2 or 3 digits), 'space', and national number (which may embed single space characters for readability)

Mandatory country code: true Max total digits: 15
cruise.company.contact.customerServicePhone Copied to clipboard Telephone Number OPTIONAL

The customer service phone number in ITU-T E123 format.

Data consists of '+', country code (1, 2 or 3 digits), 'space', and national number (which may embed single space characters for readability)

Mandatory country code: true Max total digits: 15
cruise.departureDate Copied to clipboard Date OPTIONAL

The cruise departure/ sail date.

This field is required when cruise industry data is provided.

The value entered must be equal to or earlier than cruise.returnDate.

Data must comply with ISO 8601 extended date format, yyyy-mm-dd

cruise.departurePort Copied to clipboard OPTIONAL

A departurePort is the port where the passenger(s) boarded the cruise ship when the cruise trip started

cruise.departurePort.address Copied to clipboard OPTIONAL

Address of the cruise line.

cruise.departurePort.address.city Copied to clipboard String OPTIONAL

The city portion of the address.

Data can consist of any characters

Min length: 1 Max length: 100
cruise.departurePort.address.country Copied to clipboard Upper case alphabetic text OPTIONAL

The 3 letter ISO standard alpha country code of the address.

Data must consist of the characters A-Z

Min length: 3 Max length: 3
cruise.departurePort.address.postCodeZip Copied to clipboard Alphanumeric + additional characters OPTIONAL

The post code or zip code of the address.

Data may consist of the characters 0-9, a-z, A-Z, ' ', '-'

Min length: 1 Max length: 10
cruise.departurePort.address.stateProvinceCode Copied to clipboard String OPTIONAL

The state or province code of the address.

The value must match the second part of the ISO 3166-2 code. For an address in the United States provide the 2-letter ISO 3166-2 state code. For US military bases provide one of AE, AA, AP. For an address in Canada provide the 2-letter ISO 3166-2 province code.

Data can consist of any characters

Min length: 1 Max length: 3
cruise.departurePort.address.street Copied to clipboard String OPTIONAL

The first line of the address.

Data can consist of any characters

Min length: 1 Max length: 100
cruise.departurePort.address.street2 Copied to clipboard String OPTIONAL

The second line of the address (if provided).

Data can consist of any characters

Min length: 1 Max length: 100
cruise.passenger[n] Copied to clipboard OPTIONAL

Cruise passenger details.

cruise.passenger[n].firstName Copied to clipboard String OPTIONAL

The first name of the passenger.

Data can consist of any characters

Min length: 1 Max length: 50
cruise.passenger[n].folioNumber Copied to clipboard String OPTIONAL

The folio number assigned to the passenger.

Data can consist of any characters

Min length: 1 Max length: 30
cruise.passenger[n].lastName Copied to clipboard String OPTIONAL

The last name of the passenger.

Data can consist of any characters

Min length: 1 Max length: 50
cruise.passenger[n].middleName Copied to clipboard String OPTIONAL

The middle name of the passenger.

Data can consist of any characters

Min length: 1 Max length: 50
cruise.passenger[n].title Copied to clipboard String OPTIONAL

The title of the passenger.

Data can consist of any characters

Min length: 1 Max length: 50
cruise.returnDate Copied to clipboard Date OPTIONAL

The cruise return/ sail end date.

This field is required when cruise.departureDate is provided and the value must be equal to or later than cruise.departureDate.

Data must comply with ISO 8601 extended date format, yyyy-mm-dd

cruise.shipName Copied to clipboard String OPTIONAL

The name of the cruise ship.

Data can consist of any characters

Min length: 1 Max length: 50
cruise.travelAgentCode Copied to clipboard Alphanumeric OPTIONAL

The industry code of the travel agent booking the cruise.

Data may consist of the characters 0-9, a-z, A-Z

Min length: 8 Max length: 9
cruise.travelAgentName Copied to clipboard String OPTIONAL

The name of the travel agent booking the cruise.

Data can consist of any characters

Min length: 1 Max length: 30
cruise.travelPackageItems Copied to clipboard Comma separated enumeration OPTIONAL

A comma separated list of the travel items that are included as part of a cruise travel package.

If the value CRUISE_ONLY is provided then other items are not permitted in the list.

Value must be one or more comma separated members of the following list. The values are case sensitive.

CAR_RENTAL

Car rental is included in the travel package.

CRUISE_ONLY

No additional items are included in the cruise travel package.

FLIGHT

Flights are included in the travel package.

currencyConversion Copied to clipboard OPTIONAL

Information specific to the use of dynamic currency conversion (DCC).

If you requested a rate quote via the gateway, provide the requestId as returned in the PAYMENT_OPTIONS_INQUIRY response. For rate quote requests performed outside the gateway, you must at least provide payer amount, payer currency, provider and payer exchange rate.

You can only provide DCC information on the initial transaction for an order.

If the initial transaction for an order is a payer authentication transaction with DCC information and the subsequent authorization or pay transaction contains different DCC information, that authorization or pay transaction will be rejected.

If DCC information is provided on subsequent capture or refund for an order, it will be ignored.

currencyConversion.exchangeRateTime Copied to clipboard DateTime OPTIONAL

The timestamp of when the conversion rate is effective.

The timestamp may need to be displayed to the payer on the merchant site to satisfy regulatory requirements.

An instant in time expressed in ISO8601 date + time format - "YYYY-MM-DDThh:mm:ss.SSSZ"

currencyConversion.marginPercentage Copied to clipboard Decimal OPTIONAL

The foreign exchange markup applied as a percentage to the transaction amount for providing the conversion service.

The margin percentage may need to be displayed to the payer on the merchant site to satisfy regulatory requirements.

Data is a string that consists of the characters 0-9 and '.' and represents a valid decimal number.

Min length: 1 Max length: 8
currencyConversion.payerAmount Copied to clipboard Decimal OPTIONAL

The total amount of the transaction in the payer's currency.

You must include this field if the payer accepted the DCC offer you presented to them.

Data is a string that consists of the characters 0-9 and '.' and represents a valid decimal number.

Min length: 1 Max length: 14
currencyConversion.payerCurrency Copied to clipboard Upper case alphabetic text OPTIONAL

The currency of the DCC rate quote provided by your DCC Service Provider.

The currency must be expressed as an ISO 4217 alpha code, e.g. USD and must be different to that provided for transaction currency. You must include this field if the payer accepted the DCC offer you presented to them.

Data must consist of the characters A-Z

Min length: 3 Max length: 3
currencyConversion.payerExchangeRate Copied to clipboard Decimal OPTIONAL

The exchange rate used to convert the transaction amount into the payer's currency.

The payer exchange rate includes the foreign exchange markup (marginPercentage). The payer exchange rate is displayed to the payer on the merchant site.

Data is a string that consists of the characters 0-9 and '.' and represents a valid decimal number.

Min length: 1 Max length: 19
currencyConversion.provider Copied to clipboard Enumeration OPTIONAL

This identifies the name of the provider of the DCC quote.

Value must be a member of the following list. The values are case sensitive.

FEXCO
currencyConversion.providerReceipt Copied to clipboard String OPTIONAL

The quote provider's unique reference to the rate quote.

Data can consist of any characters

Min length: 1 Max length: 100
currencyConversion.requestId Copied to clipboard String OPTIONAL

The unique identifier for your DCC quote request as returned in the PAYMENT_OPTIONS_INQUIRY response.

Data can consist of any characters

Min length: 1 Max length: 100
currencyConversion.uptake Copied to clipboard Enumeration OPTIONAL

Indicates how DCC applies to the order.

If not provided, this value defaults to NOT_REQUIRED.

Value must be a member of the following list. The values are case sensitive.

ACCEPTED

The payer accepted the DCC offer and pays in their own currency. The conditions of the rate quote are applied in the processing of this transaction.

DECLINED

The payer declined the DCC offer and pays in your transaction currency.

NOT_AVAILABLE

A rate quote was requested, but no DCC offer was provided. For rate quotes via the gateway the PAYMENT_OPTION_INQUIRY response contains a currencyConversion.gatewayCode other than QUOTE_PROVIDED.

NOT_REQUIRED

DCC is not required for this transaction.

customer Copied to clipboard OPTIONAL

Information about the customer, including their contact details.

customer.email Copied to clipboard Email OPTIONAL

The email address of the customer.

The field format restriction ensures that the email address is longer than 3 characters and adheres to a generous subset of valid RFC 2822 email addresses.

Ensures that the email address is longer than 3 characters and adheres to a generous subset of valid RFC 2822 email addresses

customer.firstName Copied to clipboard String OPTIONAL

The payer's first name.

Data can consist of any characters

Min length: 1 Max length: 50
customer.identification Copied to clipboard OPTIONAL

Identification of the payer.

This information is used to identify the sender in account funding transactions.

customer.identification.country Copied to clipboard Upper case alphabetic text OPTIONAL

The ISO 3166 three-letter country code of the issuer of the identification.

Data must consist of the characters A-Z

Min length: 3 Max length: 3
customer.identification.type Copied to clipboard Enumeration OPTIONAL

The type of identification provided for the customer.

Value must be a member of the following list. The values are case sensitive.

ALIEN_REGISTRATION_NUMBER

The customer's identification type is an alien registration number issued by U.S. Citizenship and Immigration Services (USCIS) to immigrants who apply to live in the United States.

BUSINESS_TAX_ID

The customer's identification type is a business tax id which is assigned to the business entity by the tax department.

COMPANY_REGISTRATION_NUMBER

The customer's identification type is company registration number which is issued to the company at the time of its incorporation.

CUSTOMER_IDENTIFICATION

The customer's identification type is an unspecified form of customer identification through which the customer can identified and verified.

DATE_OF_BIRTH

The customer's identification type is date of birth.

DRIVERS_LICENSE

The customer's identification type is a driving license.

EMAIL

The customer's identification type is an email address.

GOVERNMENT_ISSUED

The customer's identification type is government issued.

INDIVIDUAL_TAX_ID

The customer's identification type is an individual tax id which is assigned to the individual by the tax department.

LAW_ENFORCEMENT_IDENTIFICATION

The customer's identification type is a law enforcement identification.

MILITARY_IDENTIFICATION

The customer's identification type is a military identification which is issued by the department of defense and military.

NATIONAL_IDENTIFICATION_CARD

The customer's identification type is a national identification card issued by the customer's country.

OTHER

The customer's identification type cannot be classified using any of the other categories. This is the default value.

PASSPORT

The customer's identification type is a passport.

PHONE_NUMBER

The customer's identification type is a phone number.

PROXY_IDENTIFICATION

The customer's identification type is proxy identification.

SOCIAL_SECURITY_NUMBER

The customer's identification type is a social security number issued by Social Security Administration (SSA) to U.S. citizens, permanent residents and eligible non-immigrant workers in United States.

TRAVEL_IDENTIFICATION

The customer's identification type is travel document other than a passport.

customer.identification.value Copied to clipboard String OPTIONAL

The identification value/number for the type of identification provided in customer.identification.type.

Data can consist of any characters

Min length: 1 Max length: 50
customer.lastName Copied to clipboard String OPTIONAL

The payer's last or surname.

Data can consist of any characters

Min length: 1 Max length: 50
customer.middleName Copied to clipboard String OPTIONAL

The payer's middle name.

Data can consist of any characters

Min length: 1 Max length: 50
customer.mobilePhone Copied to clipboard Telephone Number OPTIONAL

The payer's mobile phone or cell phone number in ITU-T E123 format, for example +1 607 1234 5678

The number consists of:

  • '+'
  • country code (1, 2 or 3 digits)
  • 'space'
  • national number ( which may embed single spaces characters for readability).

Data consists of '+', country code (1, 2 or 3 digits), 'space', and national number (which may embed single space characters for readability)

Mandatory country code: true Max total digits: 15
customer.phone Copied to clipboard Telephone Number OPTIONAL

The payer's phone number in ITU-T E123 format, for example +1 607 1234 456

The number consists of:

  • '+'
  • country code (1, 2 or 3 digits)
  • 'space'
  • national number ( which may embed single spaces characters for readability).

Data consists of '+', country code (1, 2 or 3 digits), 'space', and national number (which may embed single space characters for readability)

Mandatory country code: true Max total digits: 15
customer.taxRegistrationId Copied to clipboard String OPTIONAL

The tax registration identifier of the customer.

Data can consist of any characters

Min length: 1 Max length: 30
debtRepayment Copied to clipboard OPTIONAL

Additional details for debt repayment transactions (order.purchaseType=DEBT_REPAYMENT).

If your Merchant Category Code is 6012 (Merchandise and Services—Customer Financial Institutions) or 6051 ( (Non-Financial Institutions – Foreign Currency, Non-Fiat Currency)) you may be required to provide some or all the details in this parameter group.

debtRepayment.recipient Copied to clipboard OPTIONAL

Details about the recipient of the payment and the destination account for the payment.

debtRepayment.recipient.accountIdentifier Copied to clipboard String REQUIRED

The account identifier for the payment recipient's account.

For payments into a card account provide the card number. For payments into other accounts (for example a bank account) provide the account number. The value provided will be returned masked in the response.

Data can consist of any characters

Min length: 1 Max length: 50
debtRepayment.recipient.dateOfBirth Copied to clipboard Date REQUIRED

The date of birth of the primary payment recipient in yyyy-mm-dd format.

Data must comply with ISO 8601 extended date format, yyyy-mm-dd

debtRepayment.recipient.lastName Copied to clipboard String REQUIRED

Last name of the primary payment recipient.

Data can consist of any characters

Min length: 1 Max length: 50
debtRepayment.recipient.postcodeZip Copied to clipboard String REQUIRED

Postcode of the primary payment recipient.

Data can consist of any characters

Min length: 1 Max length: 10
device Copied to clipboard OPTIONAL

Information about the device used by the payer for this transaction.

device.ani Copied to clipboard String OPTIONAL

The telephone number captured by ANI (Automatic Number Identification) when the customer calls to place the order.

Data can consist of any characters

Min length: 1 Max length: 10
device.aniCallType Copied to clipboard String OPTIONAL

The 2 digit ANI information identifier provided by the telephone company to indicate the call type, for example, cellular (61-63), toll free (24,25), etc.

Data can consist of any characters

Min length: 1 Max length: 2
device.browser Copied to clipboard String OPTIONAL

The User-Agent header of the browser the customer used to place the order.

For example, MOZILLA/4.0 (COMPATIBLE; MSIE 5.0; WINDOWS 95)

Data can consist of any characters

Min length: 1 Max length: 2048
device.fingerprint Copied to clipboard String OPTIONAL

Information collected about a remote computing device for the purpose of providing a unique identifier for the device.

For example, session ID, blackbox ID.

Data can consist of any characters

Min length: 1 Max length: 4000
device.hostname Copied to clipboard String OPTIONAL

The name of the server to which the customer is connected.

Data can consist of any characters

Min length: 1 Max length: 60
device.ipAddress Copied to clipboard String OPTIONAL

The IP address of the device used by the payer, in IPv4 nnn.nnn.nnn.nnn format.

You can provide the IP address in IPv6 format as defined in RFC4291.
IPv6 address will only be used in EMV 3DS authentication. Supplied IPv6 address will not be used for any other purposes.

Data can consist of any characters

Min length: 7 Max length: 45
device.mobilePhoneModel Copied to clipboard String OPTIONAL

The mobile phone manufacturer's identifier for the model of the mobile device used to initiate the payment.

Data can consist of any characters

Min length: 1 Max length: 255
initiator.userId Copied to clipboard String OPTIONAL

The person who initiated this transaction.

This field is automatically populated by the gateway if the transaction was created via Merchant Administration (gatewayEntryPoint=MERCHANT_ADMINISTRATION) or Merchant Manager (MERCHANT_MANAGER). In this case this is the name that the person used to log in to Merchant Administration or Merchant Manager respectively.

Data can consist of any characters

Min length: 1 Max length: 256
order Copied to clipboard REQUIRED

Information about the order associated with this transaction.

order.acceptPartialAmount Copied to clipboard Boolean OPTIONAL

Indicates whether you will accept a payment less than order.amount, e.g. when using a gift card.

If not set or set to FALSE, and the full amount is not available, the transaction will be rejected.
Unless you have been advised by your payment service provider that the gateway supports partial approvals for your acquirer, you can ignore this field.
If the gateway supports partial approvals for your acquirer you must set this field to TRUE else the transaction is rejected by the gateway.

JSON boolean values 'true' or 'false'.

order.amount Copied to clipboard Decimal OPTIONAL

The total amount for the order.  This is the net amount plus any merchant charge amounts.If you provide any sub-total amounts, then the sum of these amounts (order.itemAmount, order.taxAmount, order.shippingAndHandlingAmount, order.cashbackAmount, order.gratuityAmount, order.merchantCharge.amount and order.dutyAmount), minus the order.discountAmount must equal the net amount.

The value of this field in the response is zero if payer funds are not transferred.

Either Amount or netAmount must be provided

Data is a string that consists of the characters 0-9 and '.' and represents a valid decimal number.

Min length: 1 Max length: 14
order.cashAdvance Copied to clipboard Boolean OPTIONAL

Set this flag if the transaction is a manual cash disbursement transaction, i.e. cash is disbursed upon the acceptance of a card by a financial institution teller.

JSON boolean values 'true' or 'false'.

order.cashbackAmount Copied to clipboard Decimal OPTIONAL

The amount the payer has chosen to receive as cash in addition to the amount they are paying for the goods or services they are purchasing from you.

The cash back amount is included in the total amount of the order you provide in order.amount.

This field corresponds to EMV tag 9F03

Data is a string that consists of the characters 0-9 and '.' and represents a valid decimal number.

Min length: 1 Max length: 14
order.certainty Copied to clipboard Enumeration OPTIONAL

Indicates if you expect to capture the full order amount for which you are requesting authorization.

If you do not provide a value for order.certainty the default configured for you by your payment service provider will be used. The value provided in the response shows the value the gateway sent to the acquirer

Value must be a member of the following list. The values are case sensitive.

ESTIMATED

The amount authorized is an estimate of the amount that will be captured. It is possible that the amount captured will be less, or might not be captured at all.

FINAL

The full authorized amount is expected to be captured within the mandated time. The order will only be cancelled in exceptional circumstances (for example, the payer cancelled their purchase).

order.currency Copied to clipboard Upper case alphabetic text REQUIRED

The currency of the order expressed as an ISO 4217 alpha code, e.g. USD.

Data must consist of the characters A-Z

Min length: 3 Max length: 3
order.custom Copied to clipboard String OPTIONAL

Information about this order that is of interest to you.

For example order.custom.X, where 'X' is defined by you and must be less than 100 characters from the set A-Z, a-z, 0-9. For example, order.custom.salesRegion. You can specify up to 50 such fields. They are not sent to acquirers.

Data can consist of any characters

Min length: 1 Max length: 250
order.customerNote Copied to clipboard String OPTIONAL

A note from the payer about this order.

Data can consist of any characters

Min length: 1 Max length: 250
order.customerOrderDate Copied to clipboard Date OPTIONAL

The date the payer placed the order.

Data must comply with ISO 8601 extended date format, yyyy-mm-dd.

order.customerReference Copied to clipboard ASCII Text OPTIONAL

The payer's own reference for the order.

This reference may assist the payer to identify the order in their system. For example, a purchase order number, project identifier, or cost center.

Data consists of ASCII characters

Min length: 0 Max length: 25
order.description Copied to clipboard String OPTIONAL

Short textual description of the contents of the order.

Data can consist of any characters

Min length: 1 Max length: 127
order.discount Copied to clipboard OPTIONAL

Information about a price reduction you have applied to the order.

For example, you may apply discounts for trade, employees, bulk purchase, or a sales promotion.

order.discount.amount Copied to clipboard Decimal OPTIONAL

The total amount of the discount you have applied to the order.

Data is a string that consists of the characters 0-9 and '.' and represents a valid decimal number.

Min length: 1 Max length: 14
order.discount.code Copied to clipboard String OPTIONAL

The code you use to identify the reason for the discount.

Data can consist of any characters

Min length: 1 Max length: 40
order.discount.description Copied to clipboard String OPTIONAL

A description of your reason for the discount.

Data can consist of any characters

Min length: 1 Max length: 127
order.dutyAmount Copied to clipboard Decimal OPTIONAL

The duty amount (also known as customs tax, tariff or dues) for the order.

Data is a decimal number.

Max value: 1000000000000 Min value: 0 Max post-decimal digits: 3
order.gratuityAmount Copied to clipboard Decimal OPTIONAL

The amount the payer has chosen to provide as a gratuity or tip in addition to the amount they are paying for the goods or services they are purchasing from you.

The gratuity amount is included in the total amount of the order you provide in order.amount.

Data is a string that consists of the characters 0-9 and '.' and represents a valid decimal number.

Min length: 1 Max length: 14
order.industryPracticePaymentReason Copied to clipboard Enumeration OPTIONAL

This field is used to classify merchant initiated payments which are submitted in the context of certain industry practices.

Use this field to indicate the reason for that industry practice payment.

A merchant initiated industry practice transaction must also contain the 'scheme transaction Id' from the associated cardholder initiated transaction.

You can provide the referenceOrderId of the relevant cardholder initiated transaction and the gateway will include the 'scheme transaction Id' on the industry practice transaction. For example, when you submit a 'delayed charge', you should provide the referenceOrderId of the cardholder-initiated transaction that resulted in the delayed charge.

Alternatively, you can provide the 'scheme transaction Id' of the cardholder initiated transaction in the industry practice transaction using the field transaction.acquirer.traceId.

You must have obtained the payer's consent prior to submitting industry practice transactions.

Value must be a member of the following list. The values are case sensitive.

DELAYED_CHARGE

An additional payment processed in accordance with your terms and conditions after the original payment has been processed. For example, hotel mini bar charge after the payer has checked out or damage to a rental car.

NO_SHOW_PENALTY

A penalty charged in accordance with your charge cancellation policy the payer cancels or fails to show for the booking.

PARTIAL_SHIPMENT

A shipment where merchant decides to ship the goods from the same order in multiple shipments due to various reasons like goods availability, involvement of multiple suppliers for goods etc.

order.invoiceNumber Copied to clipboard String OPTIONAL

The invoice number you issued for this order.

Data can consist of any characters

Min length: 1 Max length: 25
order.localTaxRegistrationId Copied to clipboard String OPTIONAL

Your tax registration identifier provided by the Local/State/Province tax authority.

If you are a Canadian merchant, use this field to provide your Tax Registration ID for paying Provincial Sales Tax (PST).

Data can consist of any characters

Min length: 1 Max length: 25
order.marketplace Copied to clipboard OPTIONAL

Use this parameter group to provide additional information if you are a marketplace.You are considered a marketplace if you operate an electronic commerce website or mobile application that brings together payers and retailers and you are selling the goods or services on behalf of the retailer.In this case, the card schemes may require you to register with them as a marketplace and assign you a Marketplace ID.

You should provide this identifier to your payment service provider so that the gateway can automatically include it in all transaction messages to your acquirer.

order.marketplace.retailerLocation Copied to clipboard Enumeration OPTIONAL

Provide information about the location of the retailers for goods or services included in this order.Where a retailer is located in a country different from your country, they are considered a foreign retailer, otherwise they are considered a domestic retailer.

Value must be a member of the following list. The values are case sensitive.

DOMESTIC_ONLY

The order only contains items from domestic retailers.

FOREIGN_AND_DOMESTIC

The order contains items from both foreign and domestic retailers.

FOREIGN_ONLY

The order only contains items from foreign retailers.

order.merchantCategoryCode Copied to clipboard Digits OPTIONAL

A 4-digit code used to classify your business by the type of goods or services it offers.This is also known as the Merchant Category Code (MCC).

You only need to provide the MCC if you want to override the default value configured for your acquirer link.The value you provide must match one of those configured by your payment service provider.

Data is a string that consists of the characters 0-9.

Min length: 4 Max length: 4
order.merchantCharge Copied to clipboard OPTIONAL

Information about additional fees that you are charging the payer for processing the payment for this order, for example, a surcharge.

order.merchantCharge.amount Copied to clipboard Decimal OPTIONAL

The amount of the additional fee that you are charging the payer.

If you provide a charge amount, you must include it in the total amount for the order.

Data is a string that consists of the characters 0-9 and '.' and represents a valid decimal number.

Min length: 1 Max length: 14
order.merchantCharge.type Copied to clipboard Enumeration REQUIRED

The type of the additional fee that you are charging the payer.

Value must be a member of the following list. The values are case sensitive.

SURCHARGE

A fee that covers your cost of accepting accepting a payment method.

order.merchantPartnerIdCode Copied to clipboard Digits OPTIONAL

The code that represents a partnership agreement, between you and the issuer.

Data is a string that consists of the characters 0-9.

Min length: 1 Max length: 6
order.netAmount Copied to clipboard Decimal OPTIONAL

The amount payable for the order before merchant charge amount is applied.

If you specify a net amount the gateway will calculate the merchant charge amount for you based on the charge type (order.merchantCharge.type) provided in the request. Alternatively, you can specify the merchant charge amount (order.merchantCharge.amount) yourself.

Either Amount or netAmount must be provided

Data is a string that consists of the characters 0-9 and '.' and represents a valid decimal number.

Min length: 1 Max length: 14
order.notificationUrl Copied to clipboard Url OPTIONAL

The URL to which the gateway will send Webhook notifications when an order is created or updated.

To receive notifications at this URL, you must enable Webhook notifications in Merchant Administration. Ensure the URL is HTTPS

Ensure that this is a valid URL according to RFC 1738.

order.owningEntity Copied to clipboard String OPTIONAL

Your identifier for the part of your organization that is responsible for the order.

You might provide this data when you want to track the accountability for the order. For example, store number, sales region, branch, or profit center

Data can consist of any characters

Min length: 1 Max length: 40
order.purchaseType Copied to clipboard Enumeration OPTIONAL

Indicates the purchase of specific types of goods or services.

You must provide a value if your Merchant Category Code (MCC) is one of the following:

6051 (Quasi Cash – Merchant or Non-Financial Institutions – Foreign Currency, Non-Fiat Currency) and this transaction is for the purchase of cryptocurrency. Set the value to CRYPTOCURRENCY.

6211 (Securities – Brokers/Dealers) and this transaction is for the purchase of high-risk securities. Set the value to HIGH_RISK_SECURITIES.

6012 (Merchandise and Services—Customer Financial Institutions) or 6051 (Non-Financial Institutions – Foreign Currency, Non-Fiat Currency) and this transaction is for debt repayment. Set the value to DEBT_REPAYMENT.

If the transaction pulls money from an account for the purpose of crediting another account you must set purchase type to ACCOUNT_FUNDING.

You may set purchase type to OTHER for any other type of payment.

Value must be a member of the following list. The values are case sensitive.

CRYPTOCURRENCY

The transaction is for the purchase of a cryptocurrency.

DEBT_REPAYMENT

You may be required to provide additional details about the debt repayment in the debtRepayment parameter group.

HIGH_RISK_SECURITIES

The transaction is for the purchase of high-risk securities.

OTHER

Use this value if the purchase type for the transaction does not fit in any of the other categories.

order.reference Copied to clipboard String OPTIONAL

The identifier of the order.

For example, a shopping cart number, an order number, or an invoice number.

Data can consist of any characters

Min length: 1 Max length: 40
order.requestorName Copied to clipboard String OPTIONAL

The name of the person who requested the goods or services.

Data can consist of any characters

Min length: 1 Max length: 100
order.reward Copied to clipboard OPTIONAL

Information about reward points earned using a card enrolled in a rewards program that are being redeemed as full or part payment for this order.

order.reward.amount Copied to clipboard Decimal OPTIONAL

The amount that the payer has chosen to pay by redeeming reward points earned using a card enrolled in a rewards program for full or part payment for this purchase.

The reward amount is included in the total amount of the order you provide in order.amount.You must provide this value if the rewards program supports a payer-nominated amount (availableBalance.reward.payerNominatedAmount returned from the Balance Inquiry operation has a value of 'true').

Data is a string that consists of the characters 0-9 and '.' and represents a valid decimal number.

Min length: 1 Max length: 14
order.reward.balanceId Copied to clipboard Alphanumeric + additional characters REQUIRED

An identifier generated by the gateway when you have requested the balance available for a credit or debit card.

The presence of this field indicates that rewards are to be redeemed.The gateway will use the details stored against this ident